Buy Vinyl Plotter

Craft Robo

Craft ROBO is a powerful and sturdy media cutter, scaled down to fit on the desktop and easy enough for anyone to use. Craft ROBO is about sixteen inches long by 5.5 inches deep and 4.5 inches tall smaller than most inkjet printers. It only weighs 4.5 lbs. Dont be deceived by its small size. It can handle media up to 11 inches wide by more than 1 yard long, with a cutting area of 8 inches wide by 39.4 inches in extended mode.

The NEW CC330L-20 also has a removable SD Card * media slot so you can cut saved files without a PC!
*SD Card not included.

Craft ROBO has features typically only found on cutting plotters thousands of dollars more expensive. Our engineers have adapted these features to fit Craft ROBO's size and price, making Craft ROBO an excellent value, and the perfect entry level cutter for students, yet powerful and functional enough to satisfy professionals for small desktop sized jobs.

The package includes:

* 1 Craft ROBO CC330L-20
* 1 external power supply (100~240VAC 1.2A input /24VDC 2.0A out)
* 1 blade holder with 3 blade caps (0.1mm, 0.2mm, 0.3mm)
* 1 6 foot USB 2.0 cable
* 1 Installation Guide
* 1 Application Guide with instructions for three basic projects.
* 2 Carrier Sheets
* 1 Software installation CD (ROBO Master, Craft ROBO Controller and driver, Adobe Illustrator® Plug-in Cutting Master ROBO)

• Powerful and sturdy media cutter, scaled down to fit on the desktop and easy enough for anyone to use.
• Can handle media up to 11 inches wide by more than 1 yard long.
• Has a removable SD Card media slot so you can cut saved files without a PC.

Rating: (out of 2 reviews)

List Price: $ 249.99
Price: $ 239.94

New 25" Professional Vinyl Cutter & Plotter Best Cutter sold in the USA for less then 500.00

This new 24" C-24 vinyl cutter is the best selling cutter in all of Europe and is now available in the USA. You will see why this is the most sought after cutter sold today. The quality of this machine is hands down better then any other cutter sold for less then 500.00 and probably better then most sold for up to 1000.00. Every machine is hand inspected and tested in the factory, sealed and packaged professionally to assure your cutter arrives safely to you. Includes everything you need to get started. This new C-24 can cut vinyl, tshirt transfers, metallic films, tint, and even sandblast rubber. If you purchase a cutter from somebody else you will be replacing mother boards and playing catch up while the people with this machine will be making money. This is a great money making machine that will last you a long time.
The C-24 is a breakthrough in signmaking equipment values. This simple but capable desktop plotter is built to handle all basic vinyl graphics applications. It will cut any vinyl product you need from 60micron cast to tough reflective films and even sandblast rubber. Like the most popular vinyl cutters, It has a top speed of 400mm per second. And its integrated LCD control panel makes signmaking easy with its push button interface. For those who want great sign equipment, the C-24 Desktop cutter is a great value.

We sell only great quality products! Don't waste your money and time purchasing a low cost or unknown brand of cutting machine that are trying to enter the market. We have tested most of them. They are unreliable and have terrible precision with a specification that is meaningless. Those machines are manufactured to a price, not to a quality standard.

Latest stunning Metallic Charcoal 2009

• Cutting Technology at its best. New precise, quiet, accurate, durable 24" vinyl cutter
• Best selling cutter in Europe is now available by Bridge in the USA !
• Works with Flexi sign ! Includes signcutx2 professional software trial.
• Incredible performace and durability from a company that knows how to make high quality cutters.
• Faster, quieter, more accurate and more durable then any other cutter in the USA for under 500.00

Price: $ 419.00

Xyron 900 9-Inch Creative Station, Colors May Vary

Create stickers in the length of time it takes to turn the crank. Xyron's newest, most user friendly machine yet can also laminate and make magnets up to 9-inch wide. Cartridges pop in and out in seconds. Perfect for memory crafters, schools, office use, group projects and in-store promotions. Make stickers and magnets from photos, fabric, leather, ribbon, fancy papers and greeting cards. Keep recipes, business cards, ID and more from getting dirty or bent with the laminate. Laminate adheres smooth and evenly to both sides without the use of electricity or heat. Stickers can even be made out of intricate items like lace doilies. The adhesive sticks to the design without leaving a residue in the cut out areas.

• Perfect for memory crafters, schools, office use, and group projects
• Make stickers and magnets from photos, fabric, leather, ribbon, fancy papers and greeting cards
• No electricity or heat required
• Laminate and make magnets up to 9-inch wide
• Measures 15-6/7 by 8-6/7 by 8-1/5 inches; 1-year limited warranty

Rating: (out of 14 reviews)

List Price: $ 119.99
Price: $ 69.99

Xyron 900 9-Inch Creative Station, Colors May Vary Reviews

Review by Jennifer StAntoine:

This is the best item I've EVER purchased for scrapbooking. I purchased it at a scrapbooking convention in San Diego and immediately felt guilty about the price tag. Once I sat down to scrapbook using it, though, the guilt was gone!

It's so easy to use. You can make ANYTHING a sticker with ease. Pictures, die cuts, memorabilia, etc. If it's flat, it can be slid through the Xyron 900 and turned into a sticker. No more messy glue! It is mechanical, but not electric. You slide a cartridge in, place your picture (or whatever you want to make sticky) on one side, turn the crank and it comes out the other side as a sticker. SIMPLE! No mess, no fuss, no little removable parts to lose.

The only downside at all is that the cartridges can be pricey. I buy mine from my local Michaels ALWAYS using a 40%-50% off coupon. So, that really helps, otherwise you are looking at - each. BUT, other adhesives can be expensive, too. I haven't attempted to see which costs more over the long run.

The other amazing thing is that you have a myriad of cartridges to choose from. You can use permanent adhesive, repositionable adhesive, MAGNET back, you can laminate, etc.

This is a MUST have for scrapbookers. You will save a great deal of time and not have sticky fingers! If you KNOW a scrapbooker and they don't have this machine... BUY IT FOR THEM. They will love you forever.

Review by slim:

If I could, I would change my rating to 3 stars instead of 5.

I've owned this item for over three years now.

Pros:

The variety of things you can do with this machine are amazing. Make magnets, make stickers, and laminate with no heat! Simple design means no batteries, no need to plug in, just grab it and go. This has been great for craft projects with kids, scrapbooking, and protecting keepsakes. As long as you are working with flat, smooth items, it works consistently well.

Cons;

Cartridges are expensive, so use a coupon when possible.

Fabric appliques didn't work, in that fabric items didn't stick well, and the thickness of the fabric caused material to wrinkle.

The magnet cartridge laminates the front of the item, and puts sticky thin magnetic material on the back of the item as it goes through the roller. When making magnets, I found the magnetic material too thin- and sometimes because it is so thin, it isn't powerful enough to hold things up. It also is so thin it makes it very difficult to get the magnet off a surface if you have made a sticker out of something thin (like a photo.) Don't try to make a magnet out of anything too thick though, or it will wrinkle the laminate on the front and be ruined. I have been able to remove the front laminate, but it took parts of the project with it because it is very sticky.

It claims you can trim magnets right up to the edge, but I have found this is not a good idea with slightly thicker items (like about the thickness of a credit card without the numbers on it.) The slight "height" of the item creates a small gap between where the laminate and magnetic material come together around the outside of the object.

2-sided laminate cartridge; good as long as you are laminating flat, smooth objects. Watch out if you get a bad cartridge, or try to laminate something a little thick or uneven. It will form wrinkles as it laminates, and that will ruin your project permanently. It's impossible to get the laminate apart unless there are air pockets.

We used it to laminate autumn leaves we collected as souvenirs from a trip to Vermont. The stems of the leaves proved to be "too thick" and caused the laminate to wrinkle. We tried laminating fresh flower petals to preserve their color, and won't ever try it again! Next time we will use dried, pressed flower petals. The fresh flower petals are too "thick" and get scraped off or moved around by the cartridge frame that nearly comes in contact with the item being laminated. Flower petals we did manage to laminate had small air pockets around them and began to rot within a week, turning brown and moldy inside the laminate. We even tried laminating the fresh flower petals between two pieces of clear protective sheets, only to have the air pockets again, which allow petals to move around, and again, rot.

Haven't tried the temporary adhesive cartridge.

Buy Xyron 900 9-Inch Creative Station, Colors May Vary now for only $ 69.99!

Roland 45° Cricut Anagraph GCC Vinyl Cutter Plotter Blade, Set of 12

Standard Blade for cutting color adhesive media (standard vinyl). Suitable for cutting media up to 0.25mm thick.
Set of 12

• Compatible: Roland (ZECU 1001, all Roland Camm`'s, CM-12, PVC900/910, CM-24, PNC 1100, 1200/1210, 1400/1410, 1850/1860, 5000, ColorCamm , CAMMJET, PC60, PC600, Mdx 15 diameter 0,2 or 0,3), ANAgraph Express (AE Series), GX-24, GCC Sable, Roland Stika 12, Vinyl Express Panther, Lynx; jsi p-24; US Cutter MH721; Pro Cutter CR-630; US cutter laserpoint; Seiki; Allen Datagraph; Graphityp; Master vinyl cutter, Samurai, Provocraft Cricut and other brand names cutters.
• Degree: 45°
• Diameter: 2mm
• Offset: 0.25mm
• High Quality Extra Long Life

Price: $ 28.99

ALL LOGO VECTOR CLIPART FOR SIGN VINYL PLOTTER CUTTER LOGOS

ANY & EVERY LOGO ----------------
Yes, that is correct! "ANY & EVERY" LOGO EVER MADE IF YOU BUY THIS
COLLECTION. THIS IS THE ONLY COLLECTION OF ITS KIND 100,000+ LOGOS
ON 5 DVDS. APPROXIMATELY 20GB OF LOGOS ALL FOR ONE LOW PRICE. YOU WON'T
FIND THIS ANYWHERE BUT RIGHT HERE.
----------------
QUICK SEARCH ----------------
Any logo can be found quickly and easily by doing a simple search with the first
few letters of the logo as all logos have been named exactly what they are, and
not just a bunch of numbers like most vector collections on the market.

----------------
HOW CAN THIS CONTAIN EVERY LOGO?
----------------

WHEN PURCHASING THIS COLLECTION YOU WILL RECEIVE A CERTIFICATE ENTITLING THE OWNER TO EMAIL A REQUEST FOR THE LOGO IN QUESTION NOT FOUND ON THE DVDS. JUST INCLUDE YOUR ORDER # PRINTED ON YOUR CERTIFICATE AND SUPPLY US WITH A JPG OF THE LOGO NEEDED AND WE CAN NORMALLY HAVE THE VECTOR IMAGE OF THE LOGO BACK TO YOU IN APPROX 24 HRS! ----------------

NO WHERE ELSE WILL YOU FIND
SUCH AN AMAZING OFFER!
----------------
FREE OF CHARGE!!!
----------------

100% EDITABLE ----------------
100% SCALABLE ----------------
100,000+ LOGOS

• Number of cut ready images: 100,000+
• Number of vector points: Reduced for easy cutting
• File formats included: EPS, AI, JPG
• Vinyl cutting and application: ALL CUT READY IMAGES!
• Extras: Full color printable PDF catalog

Price: $ 149.99

Roland CAMM-1 Servo GX-24 Desktop Vinyl Cutter

Roland's CAMM-1 vinyl cutters have been recognized worldwide as the industry's most cost-effective and reliable tools for producing banners, vehicle graphics, store displays, point-of-purchase materials, informational signs, backlit displays, flock heat transfers and almost any other vinyl cutting application. Powered by a digitally controlled servo motor for speed, precision and reliability, Roland CAMM-1 technology is now better than ever.

Easy To Use

A newly designed LCD panel is perfectly positioned for easy viewing and navigation. The CAMM-1 Servo GX-24 has a blade groove on its apron for easy manual cutting. A sheet roller base is included with every CAMM-1 Servo GX-24 to keep media feed straight. An optional stand is also available.

• Width: Accepts material from two to 27.5 inches wide
• Mechanical Resolution: 0.0005
• Speed: Cutting speeds up to 20 inches per second
• Materials: Vinyl, paint mask, reflective vinyls, twill, heat transfer, and sandblast
• Roland CutStudioTM Software included

Price: $ 1,750.00

Graphtec Cb09 Craft Robo Vinyl Cutter Plotter Holder

CB09 HOLDER for CB09 blade
Aluminum-precision vertical adjustment
Double bearings-neodymium magnets
Fits Craft Robo models
1pk per box

• Replacement for PHP32-CB09N-HS blade holder
• Aluminum-precision vertical adjustment
• Double bearings-neodymium magnets
• Fits CraftRobo models
• High Quality Extra Long Life

Price: $ 44.99

Pcut Master Cutter Vinyl Cutter Plotter Holder

Fits all PCUT vinyl cutting plotter.
Aluminum-precision vertical adjustment
Double bearings-neodymium magnets
1pk per box.

• Fits all PCUT vinyl cutting plotter
• Aluminum-precision vertical adjustment
• Double bearings-neodymium magnets
• High Quality, Extra Long Life

Price: $ 47.99